The Neomeris Conductivity Calibration Solution enables precise calibration of your measuring devices. Thanks to its easy dosing and safe handling, this bottle is ideal for regular use in various applications. Neomeris Conductivity Calibration Solution – Precise Calibration for Reliable EC Measurements The Neomeris Conductivity & TDS Calibration Solution, with a stable reference value of 84 μS/cm ± 1 % at 25 °C, is specially designed for calibrating devices used to measure electrical conductivity (EC). It ensures precise and reproducible results across numerous applications – from environmental analytics to industrial process control. Product Benefits at a Glance: Accurate Calibration: Constant conductivity value with an accuracy of ± 1 % at 25 °C – ideal for precise requirements. Certificate of Analysis Included: Each 500 ml bottle comes with a certificate confirming the quality and accuracy of the solution. Safe Handling: The innovative hygiene cap reliably protects the solution from contamination. Easy Dosing: Squeeze the bottle to dispense the required amount into the upper part – perfect for direct calibration without additional equipment. 500 ml Volume: Optimal for regular use in laboratories, facilities, and educational institutions. What is a 84 μS/cm ± 1 % (25 °C) Conductivity Calibration Solution Used For? A 84 μS/cm ± 1 % (25 °C) conductivity calibration solution is used to calibrate and check the functionality of conductivity meters in very low measurement ranges. It serves as a reference solution with precisely defined conductivity so that devices can display accurate values even in very low-conductivity solutions. Typical applications include: checking ultrapure water or deionized water, monitoring reverse osmosis systems, laboratory applications with highly diluted solutions, quality control in sensitive production processes, as well as the pharmaceutical and food industries. This calibration solution ensures that devices in the low-conductivity range operate reliably and in compliance with standards. What Do the Specifications 84 μS/cm, ± 1 %, and 25 °C Mean? 84 μS/cm: This is the nominal value of the solution’s electrical conductivity. μS/cm stands for microsiemens per centimeter. ± 1 %: The tolerance or accuracy of the given value. The actual conductivity is at most 1 % above or below 84 μS/cm. (25 °C): Reference temperature. Conductivity strongly depends on temperature and increases with rising temperatures. The value of 84 μS/cm is therefore valid precisely at 25 °C. At 25 °C, the solution has a precisely defined conductivity of 84 μS/cm with a maximum deviation of ± 1 % and is used for accurate calibration of low-range conductivity meters. Why Use a 84 μS/cm ± 1 % Conductivity Calibration Solution? A 84 μS/cm ± 1 % conductivity calibration solution is used when devices in the low-conductivity range need to be precisely adjusted or checked. The value of 84 μS/cm corresponds to very lightly mineralized water. It is particularly suitable for measurements of ultrapure or deionized water, permeate from reverse osmosis systems, lightly ionized drinking water, and highly diluted laboratory solutions. The ± 1 % specification ensures highly accurate calibration and low measurement uncertainty. This is important for quality control, compliance with standards, and sensitive processes. Use 84 μS/cm to ensure that a conductivity meter operates reliably and precisely in the low-conductivity range. Neomeris Conductivity Calibration Solutions – For Reliable EC Measurements Rely on quality, safety, and traceability – with professional Neomeris calibration solutions including a certificate of analysis. With the practical 500 ml bottle and hygienic dosing system, the Neomeris calibration solution is particularly well-suited for regular use in professional environments. Trust in quality, precision, and easy handling – for reliable measurement results day after day. Frequently asked questions Where can I find the safety data sheet for the solution I want to use? The safety data sheet is included in printed form with the delivery of the goods. The safety data sheet can be viewed or downloaded at any time in the download area of the online shop. What bottle sizes are available? Generally, there are 60/70 ml, 250 ml, 500 ml and 1,000 ml bottles. There is one exception, for example, with brands such as Hanna, where bags are sold instead of bottles. How long do the solutions last? The shelf life is printed on the product label. Upon delivery, the shelf life is at least 7 months. Can the solutions still be used after the expiry date? No, because the function and quality can no longer be guaranteed after the best-before date has expired. How can I dispose of the solutions? Please refer to the safety data sheet for more detailed information on the disposal of the solutions. Disposal must be carried out in accordance with official regulations. What is the emergency number for acute poisoning? The emergency number for the North Poison Information Centre is +49 551-19240 and is available 24/7.

Neomeris pH buffer solution with pH 10.01 is a ready-to-use solution for calibrating pH electrodes in the alkaline range. The 1000 ml content is sufficient for several calibrations. Neomeris pH Buffer Solution pH 10.01 ± 0.02 (25 °C), 1000 ml - Precise calibration in the alkaline range The Neomeris pH buffer solution pH 10.01 ± 0.02 at 25 °C is a ready-to-use solution for calibrating pH electrodes in the alkaline range. It is ideal for use in laboratories, industry, environmental analysis, research, and education, where precise measurement results are essential. Product advantages at a glance: Precise calibration: The solution offers an accuracy of ±0.02 pH at 25 °C – ideal for demanding applications. Color coding: Clearly colored yellow to clearly indicate the pH value of 10.01 – no confusion possible. Innovative hygienic closure: Reliably protects the solution from contamination and ensures clean, safe use. Easy dosing: Squeezing the bottle transports the required amount of solution to the upper part – perfect for direct calibration without additional accessories. 1000 ml content: Ideal for regular use in professional environments. Areas of application: Laboratory analysis, Food monitoring, Research & teaching, Industrial processes, Environmental and water analysis Neomeris – Reliable calibration for precise pH measurements. Rely on quality, safety, and convenience – with Neomeris’ color-coded, ready-to-use buffer solutions for daily use. With its practical 1000 ml bottle and hygienic dosing system, the Neomeris calibration solution is particularly well suited for regular use in professional environments. Trust in quality, precision, and ease of use – for reliable measurement results, day after day. Frequently asked questions Where can I find the safety data sheet for the solution I want to use? The safety data sheet is included in printed form with the delivery of the goods. The safety data sheet can be viewed or downloaded at any time in the download area of the online shop. What bottle sizes are available? Generally, there are 60/70 ml, 250 ml, 500 ml and 1,000 ml bottles. There is one exception, for example, with brands such as Hanna, where bags are sold instead of bottles. How long do the solutions last? The shelf life is printed on the product label. Upon delivery, the shelf life is at least 7 months. Can the solutions still be used after the expiry date? No, because the function and quality can no longer be guaranteed after the best-before date has expired. How can I dispose of the solutions? Please refer to the safety data sheet for more detailed information on the disposal of the solutions. Disposal must be carried out in accordance with official regulations. What is the emergency number for acute poisoning? The emergency number for the North Poison Information Centre is +49 551-19240 and is available 24/7.

Our Neomeris pH 10.01 buffer solution is suitable for calibrating pH electrodes in the alkaline range. With a volume of 500 ml, this buffer solution is ideal for regular use across various applications. Neomeris pH 10.01 ± 0.02 (25 °C), 500 ml – Calibration in the Alkaline Range Made Easy The Neomeris pH 10.01 ± 0.02 buffer solution at 25 °C is a ready-to-use solution for calibrating pH electrodes in the alkaline range. It is ideal for precise applications in laboratories, industry, environmental analytics, research, and education. Product Benefits at a Glance: Accurate Calibration: With an accuracy of ±0.02 pH at 25 °C, the solution meets the highest standards for measurement precision. Color Coding: Clearly yellow to indicate the pH 10.01 value – prevents mix-ups. Innovative Hygiene Cap: Protects the solution reliably from contamination and ensures clean, safe handling. Easy Dosing: Squeeze the bottle to dispense the required amount into the upper part – ideal for direct calibration without additional equipment. 500 ml Volume: Optimal for regular use in professional environments. What is a pH Buffer Solution Used For? A pH 10.01 ± 0.02 (25 °C), 500 ml buffer solution is used for calibrating and checking the functionality of pH meters – specifically in the alkaline (basic) measurement range. Applications include: for example, 3-point calibration (e.g., pH 4.01 / 7.00 / 10.01), measurements in basic solutions (e.g., cleaning chemicals, wastewater, aquariums, industrial processes), quality control, and ensuring accurate pH values. Devices measure most accurately in the range in which they were calibrated – therefore, pH 10.01 is important for high pH values. What Do the Specifications on the Bottle Mean? pH 10.01: This is the exact target pH of the buffer solution. The solution is chemically adjusted to maintain a stable pH of 10.01. ± 0.02: This is the accuracy/tolerance. The actual pH value lies at most 0.02 pH units above or below 10.01 (i.e., between 9.99 and 10.03). (25 °C): The specified pH value is exact at 25 °C. As pH is temperature-dependent, it may vary slightly at other temperatures. Many pH meters therefore have automatic temperature compensation. 500 ml: This is the bottle volume. This pH 10.01 buffer solution is used to precisely calibrate a pH meter in the alkaline range, with the exact reference value of 10.01 at 25 °C. Neomeris pH Buffer Solution – For Reliable pH Measurements Reliable calibration solutions from Neomeris for precise pH measurements. Rely on quality, safety, and convenience – with the color-coded, ready-to-use buffer solutions from Neomeris for daily use. Frequently asked questions Where can I find the safety data sheet for the solution I want to use? The safety data sheet is included in printed form with the delivery of the goods. The safety data sheet can be viewed or downloaded at any time in the download area of the online shop. What bottle sizes are available? Generally, there are 60/70 ml, 250 ml, 500 ml and 1,000 ml bottles. There is one exception, for example, with brands such as Hanna, where bags are sold instead of bottles. How long do the solutions last? The shelf life is printed on the product label. Upon delivery, the shelf life is at least 7 months. Can the solutions still be used after the expiry date? No, because the function and quality can no longer be guaranteed after the best-before date has expired. How can I dispose of the solutions? Please refer to the safety data sheet for more detailed information on the disposal of the solutions. Disposal must be carried out in accordance with official regulations. What is the emergency number for acute poisoning? The emergency number for the North Poison Information Centre is +49 551-19240 and is available 24/7.

Neomeris pH Buffer Solution pH 10.01 – Alkaline Calibration Solution Reliable reference solution for pH calibration The Neomeris pH buffer solution pH 10.01 is a ready-to-use calibration solution for pH electrodes in the alkaline measurement range. With a reference value of pH 10.01 ± 0.02 at 25 °C, it enables reliable calibration of pH meters wherever high pH values require precise measurement accuracy. Safe usage and versatile applications The clear yellow color coding ensures easy identification of the pH value and prevents mix-ups during daily work. The hygienic cap protects the solution from contamination and allows clean and efficient handling. Why are alkaline reference solutions necessary for precise pH calibration? Alkaline calibration solutions are required to reliably set pH meters and electrodes in the high pH range. Calibration in only the acidic or neutral range is not sufficient when measurements are performed at alkaline pH values. The pH value does not change linearly across the measurement range. Particularly in the alkaline range, pH electrodes are more sensitive to deviations, aging, or contamination. An alkaline calibration solution (e.g., pH 10.01) ensures that the meter measures accurately exactly where it will be used. Where can the buffer solution be used? The pH buffer solution is versatile and suitable for: Laboratory analysis Environmental and water analysis Food monitoring Research & education Industrial processes Frequently asked questions Where can I find the safety data sheet for the solution I want to use? The safety data sheet is included in printed form with the delivery of the goods. The safety data sheet can be viewed or downloaded at any time in the download area of the online shop. What bottle sizes are available? Generally, there are 60/70 ml, 250 ml, 500 ml and 1,000 ml bottles. There is one exception, for example, with brands such as Hanna, where bags are sold instead of bottles. How long do the solutions last? The shelf life is printed on the product label. Upon delivery, the shelf life is at least 7 months. Can the solutions still be used after the expiry date? No, because the function and quality can no longer be guaranteed after the best-before date has expired. How can I dispose of the solutions? Please refer to the safety data sheet for more detailed information on the disposal of the solutions. Disposal must be carried out in accordance with official regulations. What is the emergency number for acute poisoning? The emergency number for the North Poison Information Centre is +49 551-19240 and is available 24/7.

Neomeris pH buffer solution pH 4.01 ± 0.01 (25°C) 70 ml – precision for your pH measurement Our high-quality pH buffer solution with a defined value of pH 4.01 ± 0.01 at 25 °C is the ideal choice for calibrating pH electrodes in laboratories, industry and research. It ensures accurate and reproducible measurement results by serving as a reliable reference point. Product features: ✔️ Precisely calibrated pH value: 4.01 ± 0.01 ✔️ Temperature reference: 25 °C ✔️ Suitable for all common pH meters and electrodes ✔️ In a practical, airtight bottle to prevent contamination ✔️ Ideal for use in laboratories, the food industry, environmental analysis and more Application: Before each pH measurement, your electrode should be calibrated with a buffer solution to avoid measurement deviations. This solution is specially designed for calibration in the acidic range and can be optimally supplemented with other buffer solutions (e.g. pH 7.00 or pH 10.00) for multi-point calibration. Frequently asked questions Where can I find the safety data sheet for the solution I want to use? The safety data sheet is included in printed form with the delivery of the goods. The safety data sheet can be viewed or downloaded at any time in the download area of the online shop. What bottle sizes are available? Generally, there are 60/70 ml, 250 ml, 500 ml and 1,000 ml bottles. There is one exception, for example, with brands such as Hanna, where bags are sold instead of bottles. How long do the solutions last? The shelf life is printed on the product label. Upon delivery, the shelf life is at least 7 months. Can the solutions still be used after the expiry date? No, because the function and quality can no longer be guaranteed after the best-before date has expired. How can I dispose of the solutions? Please refer to the safety data sheet for more detailed information on the disposal of the solutions. Disposal must be carried out in accordance with official regulations. What is the emergency number for acute poisoning? The emergency number for the North Poison Information Centre is +49 551-19240 and is available 24/7.

Neomeris pH Buffer Solution pH 4.01 – Acid Calibration Solution Stable reference value in the acidic range for pH electrode calibration The Neomeris pH buffer solution with a value of 4.01 ± 0.01 at 25 °C is specifically designed for precise calibration of pH electrodes. The buffer solution assists in calibrating pH meters in the acidic range. It complements the neutral and basic references and ensures a complete, multipoint calibration. The practical hygiene cap protects the solution from contamination. Acid reference solution for precise pH calibration The Neomeris pH buffer solution pH 4.01 serves as a stable reference for exact calibration of pH electrodes in the acidic measurement range. With an accuracy of pH 4.01 ± 0.01 at 25 °C, it enables reliable and reproducible calibration results and supports consistent measurement accuracy of pH meters. Complement for multipoint calibration The acid buffer solution complements neutral and basic calibration solutions, making it an essential part of multipoint pH calibration. It ensures precise adjustment of the measurement system across the entire range. The practical hygiene cap protects the solution from contamination and ensures safe use in laboratory and industrial applications. Frequently asked questions Where can I find the safety data sheet for the solution I want to use? The safety data sheet is included in printed form with the delivery of the goods. The safety data sheet can be viewed or downloaded at any time in the download area of the online shop. What bottle sizes are available? Generally, there are 60/70 ml, 250 ml, 500 ml and 1,000 ml bottles. There is one exception, for example, with brands such as Hanna, where bags are sold instead of bottles. How long do the solutions last? The shelf life is printed on the product label. Upon delivery, the shelf life is at least 7 months. Can the solutions still be used after the expiry date? No, because the function and quality can no longer be guaranteed after the best-before date has expired. How can I dispose of the solutions? Please refer to the safety data sheet for more detailed information on the disposal of the solutions. Disposal must be carried out in accordance with official regulations. What is the emergency number for acute poisoning? The emergency number for the North Poison Information Centre is +49 551-19240 and is available 24/7.

The 1000 ml pH 4.01 buffer solution is particularly suitable for high consumption and allows for easy, practical dosing. It ensures precise calibration of pH electrodes. Neomeris pH Buffer Solution pH 4.01 ± 0.01 (25 °C), 1000 ml - Reliable calibration - buy online Our pH buffer solution with a value of 4.01 ± 0.01 at 25 °C is the ideal choice for precise calibration of pH electrodes in laboratories, industry, and environmental analysis. It ensures accurate measurement results and supports reliable quality assurance in all areas where pH measurements play an important role. Practical & hygienic: The 1000 ml bottle with special cap The solution is supplied in a large-volume 1-liter bottle equipped with an innovative hygienic cap. This reliably protects the buffer solution from contamination and ensures clean, safe use – even with frequent use. Simply squeeze – ready for calibration! By gently squeezing the bottle, a precisely measured amount of solution is transferred to the upper part – ideal for direct calibration without additional accessories or risk of contamination. Your advantages at a glance: Exact pH value: 4.01 ± 0.01 at 25 °C Large bottle with 1000 ml content – ideal for frequent users Hygienic cap protects against contamination Integrated dosing function for easy handling Compatible with all common pH meters Application tip: For precise multi-point calibration, we recommend combining with additional buffer solutions (e.g., pH 7.00 and pH 10.00). Neomeris – For precise and reliable pH measurements. Rely on quality, safety, and complete traceability – with professional calibration solutions from Neomeris, including a certificate of analysis. The practical 1000 ml bottle with hygienic dosing system makes the Neomeris calibration solution ideal for regular use in professional applications. Benefit from high precision, convenient handling, and consistently reliable measurement results – day after day. Frequently asked questions Where can I find the safety data sheet for the solution I want to use? The safety data sheet is included in printed form with the delivery of the goods. The safety data sheet can be viewed or downloaded at any time in the download area of the online shop. What bottle sizes are available? Generally, there are 60/70 ml, 250 ml, 500 ml and 1,000 ml bottles. There is one exception, for example, with brands such as Hanna, where bags are sold instead of bottles. How long do the solutions last? The shelf life is printed on the product label. Upon delivery, the shelf life is at least 7 months. Can the solutions still be used after the expiry date? No, because the function and quality can no longer be guaranteed after the best-before date has expired. How can I dispose of the solutions? Please refer to the safety data sheet for more detailed information on the disposal of the solutions. Disposal must be carried out in accordance with official regulations. What is the emergency number for acute poisoning? The emergency number for the North Poison Information Centre is +49 551-19240 and is available 24/7.

Neomeris pH buffer solution pH 4.01 ± 0.01 (25°C) 500 ml – precision meets practical handling This high-quality pH buffer solution with a defined value of pH 4.01 ± 0.01 at 25 °C is ideal for calibrating your pH electrodes in laboratories, industry and environmental analysis. It ensures reliable and reproducible measurement results – a must for any professional pH measurement. Innovative 500 ml bottle with hygienic cap The solution is supplied in a specially developed 500 ml bottle equipped with a special hygienic cap. This effectively protects the buffer solution from contamination and makes it particularly easy to use: ➡️ Simply squeeze – ready for calibration! By gently squeezing the bottle, a sufficient amount of buffer solution is transferred to the upper part – perfectly dosed for direct calibration of your electrode, without any additional accessories or risk of contamination. Product advantages at a glance: ✔️ Precise pH value: 4.01 ± 0.01 at 25°C ✔️ Practical 500 ml bottle with dosing function ✔️ Hygienic cap protects against contamination ✔️ Ideal for laboratories, industry and environmental analysis ✔️ Compatible with all common pH meters Tip: For precise multi-point calibration, we recommend combining with other buffer solutions (e.g. pH 7.00 and pH 10.00). Frequently asked questions Where can I find the safety data sheet for the solution I want to use? The safety data sheet is included in printed form with the delivery of the goods. The safety data sheet can be viewed or downloaded at any time in the download area of the online shop. What bottle sizes are available? Generally, there are 60/70 ml, 250 ml, 500 ml and 1,000 ml bottles. There is one exception, for example, with brands such as Hanna, where bags are sold instead of bottles. How long do the solutions last? The shelf life is printed on the product label. Upon delivery, the shelf life is at least 7 months. Can the solutions still be used after the expiry date? No, because the function and quality can no longer be guaranteed after the best-before date has expired. How can I dispose of the solutions? Please refer to the safety data sheet for more detailed information on the disposal of the solutions. Disposal must be carried out in accordance with official regulations. What is the emergency number for acute poisoning? The emergency number for the North Poison Information Centre is +49 551-19240 and is available 24/7.

Neomeris pH Buffer Solution pH 7.00 ± 0.01 (25 °C), 500 ml Precision and Safety for Your pH Calibration The Neomeris pH buffer solution with a pH value of 7.00 is ideal for calibrating your measuring devices. It is excellently suited for a wide range of applications where pH values are measured. The Neomeris pH buffer solution pH 7.00 ± 0.01 at 25 °C is a ready-to-use calibration solution for the reliable adjustment of pH meters. It is ideal for use in laboratories, industry, environmental analysis, research, and education – wherever precise pH values are crucial. Product Information Exact Calibration: With an accuracy of ±0.01 pH at 25 °C, the solution meets the highest standards for measurement precision. Color Coding: The green coloration of the solution provides clear visual differentiation and prevents confusion. Innovative Hygiene Cap: The special bottle cap reliably protects the solution from contamination and allows for clean, safe use. Practical Dosing: By squeezing the bottle, the required amount of solution reaches the upper part – ideal for direct calibration without additional accessories. 500 ml Content: Optimal for regular applications and professional use. What is a pH 7.00 Buffer Solution Used For? A pH buffer solution pH 7.00 ± 0.01 (25 °C), 500 ml is used for calibration and control of pH meters in the neutral range. pH 7.00 is the most important reference point as it represents the neutral point of the pH scale. It is used for: Single-point calibration for measurements near pH 7. As a midpoint in a 2- or 3-point calibration (e.g., with pH 4.01 and 9/10). Typical Applications: Drinking water analysis Environmental analysis Food and pharmaceutical industry School, education, and laboratory As many samples lie in the pH range of 6–8, this buffer solution is particularly frequently used. What Do the Details on the Bottle Mean? pH 7.00 This is the exact target pH value of the solution at the reference temperature. The chemical composition ensures a stable neutral value. ± 0.01 This is the very small tolerance. The actual pH value is at most 0.01 pH units above or below 7.00 (i.e., between 6.99 and 7.01). This demonstrates the high accuracy of the solution. (25 °C) The specified pH value applies exactly at 25 °C, as pH is temperature-dependent. Modern pH meters take this into account via temperature compensation. 500 ml This is the filling volume of the buffer solution. The solution is used to calibrate a pH meter precisely in the neutral range, with 7.00 at 25 °C being the exact reference value with a very small deviation of ± 0.01. Neomeris pH Buffer Solution – For Reliable pH Measurements Reliable calibration solutions from Neomeris for precise pH measurements. Rely on quality, safety, and convenience – with the color-coded, ready-to-use buffer solutions from Neomeris for daily use. Frequently asked questions Where can I find the safety data sheet for the solution I want to use? The safety data sheet is included in printed form with the delivery of the goods. The safety data sheet can be viewed or downloaded at any time in the download area of the online shop. What bottle sizes are available? Generally, there are 60/70 ml, 250 ml, 500 ml and 1,000 ml bottles. There is one exception, for example, with brands such as Hanna, where bags are sold instead of bottles. How long do the solutions last? The shelf life is printed on the product label. Upon delivery, the shelf life is at least 7 months. Can the solutions still be used after the expiry date? No, because the function and quality can no longer be guaranteed after the best-before date has expired. How can I dispose of the solutions? Please refer to the safety data sheet for more detailed information on the disposal of the solutions. Disposal must be carried out in accordance with official regulations. What is the emergency number for acute poisoning? The emergency number for the North Poison Information Centre is +49 551-19240 and is available 24/7.

Precise calibration and practical application – that's exactly what our Neomeris pH buffer solution pH 7.00 offers. Thanks to its innovative hygienic closure, the solution is reliably protected against contamination. Neomeris pH Buffer Solution pH 7.00 ± 0.01 (25 °C), 1000 ml - For precise calibration in professional use The Neomeris pH buffer solution pH 7.00 ± 0.01 at 25 °C is a high-quality, ready-to-use solution for calibrating pH electrodes. It has been specially developed for applications where reliability and accuracy are crucial – whether in the laboratory, in industry, or in environmental analysis. Product advantages at a glance: Precise calibration: With an accuracy of ±0.01 pH at 25 °C, the solution meets the highest requirements for measurement precision. Color coding: The green color clearly indicates a pH value of 7.00 and prevents confusion in everyday work. Innovative hygienic closure: The special bottle cap reliably protects the solution from contamination and enables clean, direct dosing. Practical application: Squeezing the bottle releases the required amount of solution into the upper part – ideal for calibration without additional accessories. Large bottle with 1000 ml content: Perfect for regular use in professional environments. Areas of application: Food monitoring, Industrial processes, Research & teaching, Laboratory analysis, Environmental and water analysis Neomeris – Reliable calibration for precise pH measurements Rely on quality, safety, and convenience – with Neomeris’ color-coded, ready-to-use buffer solutions for daily use. With its practical 1000 ml bottle and hygienic dosing system, the Neomeris calibration solution is ideal for regular use in professional environments. Rely on quality, precision, and ease of use – for reliable measurement results, day after day. Frequently asked questions Where can I find the safety data sheet for the solution I want to use? The safety data sheet is included in printed form with the delivery of the goods. The safety data sheet can be viewed or downloaded at any time in the download area of the online shop. What bottle sizes are available? Generally, there are 60/70 ml, 250 ml, 500 ml and 1,000 ml bottles. There is one exception, for example, with brands such as Hanna, where bags are sold instead of bottles. How long do the solutions last? The shelf life is printed on the product label. Upon delivery, the shelf life is at least 7 months. Can the solutions still be used after the expiry date? No, because the function and quality can no longer be guaranteed after the best-before date has expired. How can I dispose of the solutions? Please refer to the safety data sheet for more detailed information on the disposal of the solutions. Disposal must be carried out in accordance with official regulations. What is the emergency number for acute poisoning? The emergency number for the North Poison Information Centre is +49 551-19240 and is available 24/7.

Neomeris pH Buffer Solution pH 7.00 – Ready-to-Use Reference Solution Precise calibration of pH meters and electrodes The Neomeris pH Buffer Solution pH 7.00 is a ready-to-use, standardized reference solution for precise calibration of pH meters and electrodes. With an accuracy of pH 7.00 ± 0.01 at 25 °C, it meets the highest standards for measurement reliability and reproducibility, making it ideal for the neutral pH range. Neutral Reference Solution for Reliable pH Calibration The clear green color coding allows quick identification of the buffer solution and minimizes confusion during daily use. The hygienic cap reliably protects against contamination and ensures clean handling. Easy to Use with Versatile Applications It can be used in: Laboratory analysis Environmental and water testing Food monitoring Research & education Industrial processes Frequently asked questions Where can I find the safety data sheet for the solution I want to use? The safety data sheet is included in printed form with the delivery of the goods. The safety data sheet can be viewed or downloaded at any time in the download area of the online shop. What bottle sizes are available? Generally, there are 60/70 ml, 250 ml, 500 ml and 1,000 ml bottles. There is one exception, for example, with brands such as Hanna, where bags are sold instead of bottles. How long do the solutions last? The shelf life is printed on the product label. Upon delivery, the shelf life is at least 7 months. Can the solutions still be used after the expiry date? No, because the function and quality can no longer be guaranteed after the best-before date has expired. How can I dispose of the solutions? Please refer to the safety data sheet for more detailed information on the disposal of the solutions. Disposal must be carried out in accordance with official regulations. What is the emergency number for acute poisoning? The emergency number for the North Poison Information Centre is +49 551-19240 and is available 24/7.

Neomeris pH buffer solution pH 7.00 ± 0.01 (25°C) 70 ml – Reliable calibration for precise pH measurements Neomeris pH buffer solution pH 7.00 ± 0.01 at 25°C is a high-quality, ready-to-use calibration solution for the precise adjustment of your pH electrodes. It is ideal for use in laboratories, industry, environmental analysis, research, and education—anywhere where precise pH values are crucial. Why Neomeris? – Quality that convinces: ✔️ Precise calibration: With an accuracy of ±0.01 pH at 25°C, the solution meets the highest requirements for measurement precision. ✔️ Color coding: The green color of the solution ensures clear visual differentiation and prevents mix-ups in everyday work. ✔️ Innovative hygienic closure: The special bottle cap reliably protects the solution from contamination and enables clean, safe use. ✔️ Practical dosing: Simply squeezing the bottle releases a sufficient amount of solution into the upper part – ideal for direct calibration without additional accessories. Areas of application: Laboratory analysis Environmental and water analysis Food monitoring Research and teaching Industrial processes Tip: For precise multi-point calibration, we recommend combining with other Neomeris buffer solutions, e.g., pH 4.01 and pH 10.00. Frequently asked questions Where can I find the safety data sheet for the solution I want to use? The safety data sheet is included in printed form with the delivery of the goods. The safety data sheet can be viewed or downloaded at any time in the download area of the online shop. What bottle sizes are available? Generally, there are 60/70 ml, 250 ml, 500 ml and 1,000 ml bottles. There is one exception, for example, with brands such as Hanna, where bags are sold instead of bottles. How long do the solutions last? The shelf life is printed on the product label. Upon delivery, the shelf life is at least 7 months. Can the solutions still be used after the expiry date? No, because the function and quality can no longer be guaranteed after the best-before date has expired. How can I dispose of the solutions? Please refer to the safety data sheet for more detailed information on the disposal of the solutions. Disposal must be carried out in accordance with official regulations. What is the emergency number for acute poisoning? The emergency number for the North Poison Information Centre is +49 551-19240 and is available 24/7.

The Neomeris pH buffer solution with a pH value of 9.21 is used for the calibration of pH measuring devices. The practical dosing system and the innovative hygiene cap make calibration quick and easy. Neomeris pH Buffer Solution pH 9.21 ± 0.02 (25 °C), 500 ml – Precise Calibration in the Alkaline Range The Neomeris pH buffer solution pH 9.21 ± 0.02 at 25 °C is a ready-to-use calibration solution for the reliable adjustment of pH measuring devices in the alkaline range. It is ideal for use in laboratories, industry, environmental analysis, research and education, where precise pH values are essential. Product Benefits at a Glance: Precise calibration: With an accuracy of ±0.02 pH at 25 °C, the solution meets the highest requirements for measurement precision. Color coding: The blue coloration clearly identifies the pH value 9.21 and prevents mix-ups in everyday work. Innovative hygiene cap: The special bottle cap reliably protects the solution from contamination and allows clean, direct dosing. Practical application: By squeezing the bottle, the required amount of solution is transferred into the upper part – ideal for calibration without additional equipment. 500 ml volume: Ideal for regular applications and professional use. What is a pH buffer solution used for? A pH buffer solution pH 9.21 ± 0.02 (25 °C), 500 ml is used for the calibration and verification of pH measuring devices in the slightly alkaline range. Application: For calibrating a pH meter when samples around pH 9 will be measured later. For 2- or 3-point calibrations (e.g. together with pH 7.00 and optionally pH 4.01 or 10.01). Areas of application: Drinking water and wastewater analysis, environmental analysis, aquatics, as well as industrial and laboratory processes with slightly basic solutions. A measuring device measures most accurately in the range in which it was calibrated – therefore pH 9.21 is suitable for samples with pH values around 8–10. What do the specifications on the bottle mean? pH 9.21: This is the exact target pH value of the buffer solution. The chemical composition ensures that this value remains stable. ± 0.02: This is the tolerance or accuracy. The actual pH value is at most 0.02 pH units above or below 9.21 (i.e. between 9.19 and 9.23). (25 °C): The specified pH value applies exactly at 25 °C. As the pH value depends on temperature, it changes slightly at other temperatures. Modern pH meters therefore use temperature compensation. 500 ml: This is the filling volume of the solution in the bottle. The Neomeris pH buffer solution pH 9.21 is used to precisely and standard-compliantly calibrate a pH measuring device in the slightly alkaline range. Frequently asked questions Where can I find the safety data sheet for the solution I want to use? The safety data sheet is included in printed form with the delivery of the goods. The safety data sheet can be viewed or downloaded at any time in the download area of the online shop. What bottle sizes are available? Generally, there are 60/70 ml, 250 ml, 500 ml and 1,000 ml bottles. There is one exception, for example, with brands such as Hanna, where bags are sold instead of bottles. How long do the solutions last? The shelf life is printed on the product label. Upon delivery, the shelf life is at least 7 months. Can the solutions still be used after the expiry date? No, because the function and quality can no longer be guaranteed after the best-before date has expired. How can I dispose of the solutions? Please refer to the safety data sheet for more detailed information on the disposal of the solutions. Disposal must be carried out in accordance with official regulations. What is the emergency number for acute poisoning? The emergency number for the North Poison Information Centre is +49 551-19240 and is available 24/7.

The ready-to-use Neomeris pH buffer solution with a pH value of 9.21 is quick and easy to use. With a content of 1000 ml, it is ideal for high-consumption applications and is sufficient for multiple calibrations over a longer period of time. Neomeris pH Buffer Solution pH 9.21 ± 0.02 (25 °C), 1000 ml - Precise calibration for the alkaline range The Neomeris pH buffer solution pH 9.21 ± 0.02 at 25 °C is a high-quality, ready-to-use solution for calibrating pH electrodes in the alkaline range. It is ideal for professional use in laboratories, industry, environmental analysis, research, and education, where accurate measurement results are essential. Product advantages at a glance: Precise calibration: With an accuracy of ±0.02 pH at 25 °C, the solution meets the highest requirements for measurement precision. Color coding: The blue color clearly indicates a pH value of 9.21 and prevents confusion in everyday work. Innovative hygienic closure: The special bottle cap reliably protects the solution from contamination and enables clean, direct dosing. Practical application: Squeezing the bottle releases the required amount of solution into the upper part – ideal for calibration without additional accessories. 1000 ml content: Ideal for regular use in professional environments with high consumption. Areas of application: Industrial processes, Food monitoring, Laboratory analysis, Research & teaching, Environmental and water analysis Neomeris – Reliable calibration for precise pH measurements Rely on quality, safety, and convenience – with Neomeris’ color-coded, ready-to-use buffer solutions for daily use. With its practical 1000 ml bottle and hygienic dosing system, the Neomeris calibration solution is particularly well suited for regular use in professional environments. Trust in quality, precision, and ease of use – for reliable measurement results, day after day. Frequently asked questions Where can I find the safety data sheet for the solution I want to use? The safety data sheet is included in printed form with the delivery of the goods. The safety data sheet can be viewed or downloaded at any time in the download area of the online shop. What bottle sizes are available? Generally, there are 60/70 ml, 250 ml, 500 ml and 1,000 ml bottles. There is one exception, for example, with brands such as Hanna, where bags are sold instead of bottles. How long do the solutions last? The shelf life is printed on the product label. Upon delivery, the shelf life is at least 7 months. Can the solutions still be used after the expiry date? No, because the function and quality can no longer be guaranteed after the best-before date has expired. How can I dispose of the solutions? Please refer to the safety data sheet for more detailed information on the disposal of the solutions. Disposal must be carried out in accordance with official regulations. What is the emergency number for acute poisoning? The emergency number for the North Poison Information Centre is +49 551-19240 and is available 24/7.

Neomeris pH buffer solution pH 9.21 ± 0.02 (25°C), 250 ml – Precise calibration in the alkaline range Neomeris pH buffer solution pH 9.21 ± 0.02 at 25°C is a ready-to-use calibration solution for the reliable adjustment of pH meters in the alkaline range. It is ideal for applications in laboratories, industry, environmental analysis, research, and education where precise pH values are crucial. Product advantages at a glance: ✔️ Precise calibration: With an accuracy of ±0.02 pH at 25°C, the solution meets the highest standards of measurement precision. ✔️ Color coding: The blue color clearly indicates a pH value of 9.21 and prevents confusion in everyday work. ✔️ Innovative hygienic closure: The special bottle cap reliably protects the solution from contamination and enables clean, direct dosing. ✔️ Practical application: Squeezing the bottle releases the required amount of solution into the upper part – ideal for calibration without additional accessories. ✔️ 250 ml content: Compact and ideal for regular use in everyday laboratory work. Areas of application: Laboratory analysis Environmental and water analysis Food monitoring Research & teaching Industrial processes Neomeris – Reliable calibration for precise pH measurements. Rely on quality, safety, and convenience – with Neomeris' color-coded, ready-to-use buffer solutions for everyday use. Frequently asked questions Where can I find the safety data sheet for the solution I want to use? The safety data sheet is included in printed form with the delivery of the goods. The safety data sheet can be viewed or downloaded at any time in the download area of the online shop. What bottle sizes are available? Generally, there are 60/70 ml, 250 ml, 500 ml and 1,000 ml bottles. There is one exception, for example, with brands such as Hanna, where bags are sold instead of bottles. How long do the solutions last? The shelf life is printed on the product label. Upon delivery, the shelf life is at least 7 months. Can the solutions still be used after the expiry date? No, because the function and quality can no longer be guaranteed after the best-before date has expired. How can I dispose of the solutions? Please refer to the safety data sheet for more detailed information on the disposal of the solutions. Disposal must be carried out in accordance with official regulations. What is the emergency number for acute poisoning? The emergency number for the North Poison Information Centre is +49 551-19240 and is available 24/7.

Ready-to-use 200 mV redox buffer solution for the calibration and verification of ORP electrodes. Reliable ORP reference solution for precise redox measurements. Neomeris Redox Buffer Solution 200 mV ± 5 mV (25 °C) – ORP Reference Solution Defined redox reference for calibration in the lower ORP measurement range. The Neomeris redox buffer solution with a value of 200 mV ± 5 mV at 25 °C is a ready-to-use reference solution for calibrating and checking redox (ORP) electrodes. It ensures reliable and reproducible measurement results. The solution is used for regular calibration of ORP measuring devices. The known reference value makes it possible to detect measurement deviations at an early stage. What is a 200 mV redox buffer solution used for? A redox buffer solution 200 mV ± 5 mV (25 °C), 250 ml is used for the calibration and verification of redox (ORP) measuring devices. It provides a precisely defined reference potential in the lower mV range. It is used to adjust a redox measuring device so that it displays correct measurement values and to check the electrode for drift, aging or contamination. Typical application areas for redox measurements include drinking water and wastewater analysis, aquaristics, environmental monitoring, and industrial processes with weakly oxidizing or slightly reducing conditions. The value of 200 mV lies in the lower oxidation range and is suitable for systems with low redox potential. What do the specifications on the bottle mean? 200 mV This is the target value of the redox potential of the solution at the reference temperature of 25 °C. ± 5 mV This indicates the tolerance or accuracy. The actual value lies between 195 mV and 205 mV. (25 °C) The specified value applies exactly at 25 °C because the redox potential depends on temperature. 250 ml This is the filling volume of the solution. The larger quantity is suitable for regular calibrations or use in laboratories or operational environments. The solution is used to precisely calibrate or verify a redox measuring device in the lower mV range, where 200 mV at 25 °C is the defined reference value with an accuracy of ± 5 mV. Neomeris – For stable and precise ORP measurements. Ensure the functionality of your redox sensors and achieve reliable measurement results with the professional buffer solutions from Neomeris including a certificate of analysis. Rely on quality, safety and convenience when calibrating your measuring devices with the color-coded, ready-to-use solutions from Neomeris. Frequently asked questions Where can I find the safety data sheet for the solution I want to use? The safety data sheet is included in printed form with the delivery of the goods. The safety data sheet can be viewed or downloaded at any time in the download area of the online shop. What bottle sizes are available? Generally, there are 60/70 ml, 250 ml, 500 ml and 1,000 ml bottles. There is one exception, for example, with brands such as Hanna, where bags are sold instead of bottles. How long do the solutions last? The shelf life is printed on the product label. Upon delivery, the shelf life is at least 7 months. Can the solutions still be used after the expiry date? No, because the function and quality can no longer be guaranteed after the best-before date has expired. How can I dispose of the solutions? Please refer to the safety data sheet for more detailed information on the disposal of the solutions. Disposal must be carried out in accordance with official regulations. What is the emergency number for acute poisoning? The emergency number for the North Poison Information Centre is +49 551-19240 and is available 24/7.

Neomeris Redox Buffer Solution 200 mV Neomeris Redox Buffer Solution 200 mV is excellent for reliable calibration. With a volume of 500 ml and easy dosing, it is ideal for regular use in many different areas. Neomeris Redox Buffer Solution 200 mV ± 5 mV (25 °C), 500 ml – Reliable calibration for precise ORP measurements The Neomeris redox buffer solution with a stable value of 200 mV ± 5 mV at 25 °C is the ideal solution for calibrating redox electrodes (ORP sensors). It ensures precise and reproducible measurement results in demanding applications in water and environmental analysis, wastewater technology, and industrial process control. Product advantages at a glance: Precise calibration: The solution offers reliable accuracy of ±5 mV at 25 °C – ideal for precise requirements. Certificate of analysis included: Each bottle comes with a free certificate confirming the quality and accuracy of the solution. Safe handling: The innovative hygienic cap protects the solution from contamination and ensures clean application. Easy dosing: Squeezing the bottle dispenses the required amount of solution into the upper part – perfect for direct calibration without additional accessories. 500 ml content: Ideal for regular use in laboratories and industrial processes with higher consumption. Areas of application: Water and environmental analysis: Control of the redox potential in natural waters and in drinking water treatment. Wastewater technology: Monitoring of biological reaction processes in sewage treatment plants. Industrial applications: Process control in chemical and pharmaceutical production. Neomeris – precision you can rely on. Ensure the functionality of your ORP sensors and achieve consistent measurement results – with professional redox buffer solutions from Neomeris. The practical 500 ml bottle with a hygienic dosing system makes the Neomeris calibration solution ideal for regular use in professional applications. Benefit from high precision, convenient use, and consistently reliable measurement results – day after day. Frequently asked questions Where can I find the safety data sheet for the solution I want to use? The safety data sheet is included in printed form with the delivery of the goods. The safety data sheet can be viewed or downloaded at any time in the download area of the online shop. What bottle sizes are available? Generally, there are 60/70 ml, 250 ml, 500 ml and 1,000 ml bottles. There is one exception, for example, with brands such as Hanna, where bags are sold instead of bottles. How long do the solutions last? The shelf life is printed on the product label. Upon delivery, the shelf life is at least 7 months. Can the solutions still be used after the expiry date? No, because the function and quality can no longer be guaranteed after the best-before date has expired. How can I dispose of the solutions? Please refer to the safety data sheet for more detailed information on the disposal of the solutions. Disposal must be carried out in accordance with official regulations. What is the emergency number for acute poisoning? The emergency number for the North Poison Information Centre is +49 551-19240 and is available 24/7.

For reliable and consistent measurements, the ready-to-use Neomeris Redox Buffer Solution 200 mV is ideal. It is used to calibrate your electrodes and related measuring devices. Neomeris Redox Buffer Solution 200 mV ± 5 mV (25 °C), 70 ml Precise calibration for reliable ORP measurements The Neomeris Redox Buffer Solution with a defined value of 200 mV ± 5 mV at 25 °C is the perfect choice for calibrating redox electrodes (ORP sensors). It ensures reliable and reproducible results in demanding applications such as water and environmental analysis, wastewater technology, and industrial process control. Product Benefits at a Glance Exact Calibration: Constant redox potential of 200 mV ± 5 mV at 25 °C – ideal for precise ORP measurements. Ready to Use: Immediately usable – no mixing or dilution required. Compact 70 ml Bottle: Ideal for single calibrations or mobile applications. Reliable Quality: Designed for professional use in laboratories and industry. Where Are Redox Potential Measurements Needed? Water and Environmental Analysis: Monitoring redox potential in natural waters and drinking water treatment. Wastewater Technology: Monitoring biological reaction processes in treatment plants. Industrial Applications: Process control in chemical and pharmaceutical production. Why Use a Redox Buffer Solution? A Redox Buffer Solution 200 mV ± 5 mV (25 °C), 70 ml is used to calibrate and verify redox (ORP) measuring devices. It serves as a reference solution with a precisely defined redox potential. It is needed for: Setting a redox meter so that it displays accurate mV readings. Checking the electrode for aging or contamination. Applications in industrial processes, environmental analysis, aquaristics, and drinking or wastewater monitoring. The value of 200 mV is in the lower oxidation range and is suitable for monitoring weakly oxidizing or slightly reducing systems. A measuring device works most reliably when regularly checked with a reference solution. What Do the Bottle Labels Mean? 200 mV This is the target redox potential of the solution at 25 °C. ± 5 mV This is the tolerance. The actual value ranges from 195 mV to 205 mV. (25 °C) The stated value applies exactly at 25 °C, as redox potential is temperature-dependent. 70 ml This is the filling volume of the solution. The solution is used to calibrate or check a redox meter in the lower mV range, with 200 mV at 25 °C being the defined reference value with ± 5 mV accuracy. Neomeris – For Stable and Precise ORP Measurements Ensure the functionality of your redox sensors and achieve consistent results with Neomeris professional buffer solutions. Rely on quality, safety, and convenience when calibrating your devices with Neomeris ready-to-use, color-coded solutions. Frequently asked questions Where can I find the safety data sheet for the solution I want to use? The safety data sheet is included in printed form with the delivery of the goods. The safety data sheet can be viewed or downloaded at any time in the download area of the online shop. What bottle sizes are available? Generally, there are 60/70 ml, 250 ml, 500 ml and 1,000 ml bottles. There is one exception, for example, with brands such as Hanna, where bags are sold instead of bottles. How long do the solutions last? The shelf life is printed on the product label. Upon delivery, the shelf life is at least 7 months. Can the solutions still be used after the expiry date? No, because the function and quality can no longer be guaranteed after the best-before date has expired. How can I dispose of the solutions? Please refer to the safety data sheet for more detailed information on the disposal of the solutions. Disposal must be carried out in accordance with official regulations. What is the emergency number for acute poisoning? The emergency number for the North Poison Information Centre is +49 551-19240 and is available 24/7.

Neomeris Redox Buffer Solution 475 mV is ideal for calibrating redox electrodes. With a content of 500 ml, it is perfect for regular use in various areas of application. Neomeris Redox Buffer Solution 475 mV ± 5 mV (25 °C), 500 ml Precise calibration for reliable ORP measurements The Neomeris redox buffer solution with a stable value of 475 mV ± 5 mV at 25 °C is the ideal solution for calibrating redox electrodes (ORP sensors). It ensures precise and consistent measurement results in demanding applications in water and environmental analysis, wastewater technology, and industrial process control. Product advantages at a glance: Precise calibration: The solution provides a reliable redox potential of 475 mV ± 5 mV at 25 °C – ideal for precise requirements. Safe handling: The special hygienic closure protects the solution from contamination and enables clean dosing. Certificate of analysis included: Each 250 ml and 500 ml bottle comes with a certificate confirming the quality and accuracy of the solution. Easy to use: By squeezing the bottle, the required amount of solution is transferred to the upper chamber – perfect for direct calibration without additional accessories. 500 ml content: Ideal for regular use in laboratories and industrial applications. Areas of application: Water and environmental analysis: Monitoring the redox potential in natural waters and drinking water treatment. Wastewater technology: Monitoring biological reaction processes in wastewater treatment plants. Industrial applications: Process control in chemical and pharmaceutical production. Neomeris – For stable and precise ORP measurements Rely on quality and safety when calibrating your redox sensors – with professional buffer solutions from Neomeris. The practical 500 ml bottle with a hygienic dosing system makes the Neomeris calibration solution ideal for regular use in professional applications. Benefit from high precision, convenient use, and consistently reliable measurement results – day after day. Frequently asked questions Where can I find the safety data sheet for the solution I want to use? The safety data sheet is included in printed form with the delivery of the goods. The safety data sheet can be viewed or downloaded at any time in the download area of the online shop. What bottle sizes are available? Generally, there are 60/70 ml, 250 ml, 500 ml and 1,000 ml bottles. There is one exception, for example, with brands such as Hanna, where bags are sold instead of bottles. How long do the solutions last? The shelf life is printed on the product label. Upon delivery, the shelf life is at least 7 months. Can the solutions still be used after the expiry date? No, because the function and quality can no longer be guaranteed after the best-before date has expired. How can I dispose of the solutions? Please refer to the safety data sheet for more detailed information on the disposal of the solutions. Disposal must be carried out in accordance with official regulations. What is the emergency number for acute poisoning? The emergency number for the North Poison Information Centre is +49 551-19240 and is available 24/7.

The Neomeris redox buffer solution 475 mV is ideal for the calibration of redox measuring devices and ORP electrodes. Neomeris Redox Buffer Solution 475 mV ± 5 mV (25 °C), 250 ml – Defined ORP Reference Solution Standard solution for calibrating redox measuring devices and ORP electrodes The Neomeris redox buffer solution with a stable value of 475 mV ± 5 mV at 25 °C is specifically designed for the calibration of redox electrodes (ORP sensors). In sensitive fields such as water and environmental analysis, wastewater technology, and industrial processes, it enables reliable and reproducible measurement results. At 25 °C the solution provides a stable redox potential of 475 mV (± 5 mV). The integrated hygiene cap reliably protects the solution from contamination and ensures consistently high quality throughout its service life. What is a 475 mV redox buffer solution used for? A redox buffer solution 475 mV ± 5 mV (25 °C), 250 ml is used for calibration and verification of redox (ORP) measuring devices. It provides a defined reference potential used to check or adjust the accuracy of a redox electrode. It is used: To adjust a redox measuring device so it displays correct mV values. To regularly check the electrode function (detecting drift or contamination). Typical applications where redox potential is measured include drinking water and wastewater monitoring, swimming pool technology, aquaristics, environmental analysis, and industrial processes. The value of 475 mV lies in the medium oxidation range and is suitable for systems with moderate oxidation potential. What do the specifications on the bottle mean? 475 mV This is the target redox potential of the solution at 25 °C. ± 5 mV This is the tolerance. The actual value lies between 470 mV and 480 mV. (25 °C) The specified value applies exactly at 25 °C because redox potential depends on temperature. 250 ml This is the filling volume of the bottle. The larger quantity is suitable for frequent calibrations or regular use in laboratories or industrial environments. The solution is used to precisely calibrate or check a redox measuring device in the medium mV range, where 475 mV at 25 °C is the defined reference value with an accuracy of ± 5 mV. Neomeris – For stable and precise ORP measurements. Rely on quality, safety and full traceability – with professional Neomeris calibration solutions including a certificate of analysis. Ensure the functionality of your redox sensors and achieve reliable measurement results with the professional buffer solutions from Neomeris. Trust in quality, safety and convenience when calibrating your measuring devices using the color-coded, ready-to-use solutions from Neomeris. The practical 250 ml bottle with a hygienic dosing system makes the Neomeris calibration solution ideal for regular use in professional applications. Benefit from high precision, convenient handling and consistently reliable measurement results – day after day. Frequently asked questions Where can I find the safety data sheet for the solution I want to use? The safety data sheet is included in printed form with the delivery of the goods. The safety data sheet can be viewed or downloaded at any time in the download area of the online shop. What bottle sizes are available? Generally, there are 60/70 ml, 250 ml, 500 ml and 1,000 ml bottles. There is one exception, for example, with brands such as Hanna, where bags are sold instead of bottles. How long do the solutions last? The shelf life is printed on the product label. Upon delivery, the shelf life is at least 7 months. Can the solutions still be used after the expiry date? No, because the function and quality can no longer be guaranteed after the best-before date has expired. How can I dispose of the solutions? Please refer to the safety data sheet for more detailed information on the disposal of the solutions. Disposal must be carried out in accordance with official regulations. What is the emergency number for acute poisoning? The emergency number for the North Poison Information Centre is +49 551-19240 and is available 24/7.

The ready-to-use Neomeris redox buffer solution with an exactly known value of 475 mV is used for the calibration of ORP electrodes and the associated measuring devices. This ensures precise measurement results. Thanks to easy dosing and simple handling, it is ideal for single calibrations. Neomeris Redox Buffer Solution 475 mV ± 5 mV (25 °C), 70 ml Compact Solution for Precise ORP Calibration The Neomeris redox buffer solution with a stable value of 475 mV ± 5 mV at 25 °C is specifically designed for the calibration of redox electrodes (ORP sensors). It enables reliable and reproducible measurement results in sensitive areas such as water and environmental analysis, wastewater technology, and industrial process control. Product Advantages at a Glance Precise Calibration: The solution provides an accurate redox potential of 475 mV ± 5 mV at 25 °C – ideal for demanding applications. Ready to Use: Immediately usable – no mixing or dilution required. Compact 70 ml Bottle: Perfect for single calibrations, mobile use, or occasional applications. Reliable Quality: Developed for professional requirements in laboratories and industry. Application Areas Water and Environmental Analysis: Monitoring the redox potential in natural waters and during drinking water treatment. Wastewater Technology: Monitoring biological reaction processes in wastewater treatment plants. Industrial Applications: Process control in chemical and pharmaceutical production. What is a Redox Buffer Solution Used For? A redox buffer solution 475 mV ± 5 mV (25 °C), 70 ml is used for the calibration and verification of redox (ORP) measuring devices that measure the oxidation or reduction potential of a solution. It is used for: Adjusting a redox measuring device so that readings are accurate and reliable. Measurements in laboratories, water treatment, environmental analysis, or industrial processes where the redox state is monitored. Particularly suitable for regular checking of the measuring electrode. A value of 475 mV typically corresponds to a moderately oxidizing system, e.g., lightly chlorinated water or weakly oxidizing solutions. What Do the Details on the Bottle Mean? 475 mV This is the target value of the redox potential at 25 °C. The solution is chemically stable to provide exactly this value. ± 5 mV This is the tolerance or accuracy. The actual redox value is at most 5 mV above or below 475 mV (i.e., between 470 mV and 480 mV). This ensures precise calibration. (25 °C) The value applies exactly at 25 °C, as the redox potential is temperature-dependent. Many devices account for this via temperature compensation. 70 ml This is the filling volume of the solution in the bottle. The solution is used to reliably calibrate a redox measuring device in the medium oxidation range, where 475 mV at 25 °C is the defined reference value with a tolerance of ± 5 mV. Neomeris – For Stable and Precise ORP Measurements Ensure the functionality of your redox sensors and achieve consistent measurement results with the professional buffer solutions from Neomeris. Rely on quality, safety, and convenience when calibrating your measuring devices with the color-coded, ready-to-use solutions from Neomeris. Frequently asked questions Where can I find the safety data sheet for the solution I want to use? The safety data sheet is included in printed form with the delivery of the goods. The safety data sheet can be viewed or downloaded at any time in the download area of the online shop. What bottle sizes are available? Generally, there are 60/70 ml, 250 ml, 500 ml and 1,000 ml bottles. There is one exception, for example, with brands such as Hanna, where bags are sold instead of bottles. How long do the solutions last? The shelf life is printed on the product label. Upon delivery, the shelf life is at least 7 months. Can the solutions still be used after the expiry date? No, because the function and quality can no longer be guaranteed after the best-before date has expired. How can I dispose of the solutions? Please refer to the safety data sheet for more detailed information on the disposal of the solutions. Disposal must be carried out in accordance with official regulations. What is the emergency number for acute poisoning? The emergency number for the North Poison Information Centre is +49 551-19240 and is available 24/7.

The Neomeris redox buffer solution 650 mV in the 70 ml bottle is ideal for single calibrations of your measuring devices. It can be used in various areas, such as water and environmental analysis. Neomeris Redox Buffer Solution 650 mV ± 5 mV (25 °C), 70 ml Compact Solution for Precise ORP Calibration The Neomeris redox buffer solution with a stable value of 650 mV ± 5 mV at 25 °C is specifically designed for the calibration of redox electrodes (ORP sensors). It enables reliable and reproducible measurement results in demanding applications in water and environmental analysis, wastewater technology, as well as industrial process control. Product Advantages at a Glance Precise Calibration: The solution provides an accurate redox potential of 650 mV ± 5 mV at 25 °C – ideal for demanding applications. Ready to Use: Immediately usable – no mixing or dilution required. Compact 70 ml Bottle: Perfect for single calibrations, mobile use, or occasional applications. Reliable Quality: Developed for professional requirements in laboratories and industry. Application Areas Water and Environmental Analysis: Monitoring the redox potential in natural waters and during drinking water treatment. Wastewater Technology: Monitoring biological reaction processes in wastewater treatment plants. Industrial Applications: Process control in chemical and pharmaceutical production. What is a Redox Buffer Solution Used For? A redox buffer solution 650 mV ± 5 mV (25 °C), 70 ml is used for the calibration and verification of redox (ORP) measuring devices that measure the redox potential of solutions. It is used for: Adjusting a redox measuring device so that the displayed values are reliable and compliant with standards. Measurements in laboratories, environmental analysis, water treatment, or industrial processes where oxidation or reduction states must be monitored. Particularly useful for regular checking of the measuring electrode and ensuring measurement accuracy. A redox reference value such as 650 mV typically corresponds to a strongly oxidizing system, e.g., chlorine or oxygen solutions. What Do the Details on the Bottle Mean? 650 mV This is the exact target value of the redox potential of the solution at the reference temperature. Its redox potential is chemically stable and defined. ± 5 mV This is the tolerance or accuracy. The actual redox value is at most 5 mV above or below 650 mV (i.e., between 645 mV and 655 mV). This indicates the precision of the solution. (25 °C) The specified value applies exactly at 25 °C, as the redox potential is temperature-dependent. Many redox measuring devices therefore include temperature compensation. 70 ml This is the filling volume of the bottle. The solution is used to precisely adjust or verify a redox measuring device, where 650 mV at 25 °C is the defined reference value with a tolerance of ± 5 mV. Neomeris – For Stable and Precise ORP Measurements Ensure the functionality of your redox sensors and achieve reliable measurement results with the professional buffer solutions from Neomeris. Rely on quality, safety, and convenience when calibrating your measuring devices with the color-coded, ready-to-use solutions from Neomeris. Frequently asked questions Where can I find the safety data sheet for the solution I want to use? The safety data sheet is included in printed form with the delivery of the goods. The safety data sheet can be viewed or downloaded at any time in the download area of the online shop. What bottle sizes are available? Generally, there are 60/70 ml, 250 ml, 500 ml and 1,000 ml bottles. There is one exception, for example, with brands such as Hanna, where bags are sold instead of bottles. How long do the solutions last? The shelf life is printed on the product label. Upon delivery, the shelf life is at least 7 months. Can the solutions still be used after the expiry date? No, because the function and quality can no longer be guaranteed after the best-before date has expired. How can I dispose of the solutions? Please refer to the safety data sheet for more detailed information on the disposal of the solutions. Disposal must be carried out in accordance with official regulations. What is the emergency number for acute poisoning? The emergency number for the North Poison Information Centre is +49 551-19240 and is available 24/7.

The Neomeris redox buffer solution with a defined redox potential of 650 mV ± 5 mV at 25 °C serves as a reliable reference for calibrations in the high ORP measurement range. Neomeris Redox Buffer Solution 650 mV ± 5 mV (25 °C), 250 ml – ORP Reference Solution Stable redox reference for calibrations in the high ORP measurement range The Neomeris redox buffer solution with a stable value of 650 mV ± 5 mV at 25 °C is a standardized reference solution for calibrating redox measurement systems. It enables reliable and reproducible measurement results. The redox buffer solution supports reliable calibration of ORP electrodes and contributes to stable and comparable measurement results. The redox buffer solution is specifically designed for the regular calibration of ORP electrodes. It is suitable for laboratory applications as well as for use in technical and industrial processes where high redox potentials must be monitored. What is a 650 mV redox buffer solution used for? A redox buffer solution 650 mV ± 5 mV (25 °C), 250 ml is used for calibration and functional testing of redox (ORP) measuring devices. It serves as a reference solution with a precisely defined oxidation-reduction potential. It is used to adjust a redox measuring device so that it displays correct mV values and to regularly check the redox electrode for drift, aging or contamination. Typical areas where redox values are measured include industrial processes, environmental analysis, aquaristics, swimming pool technology, and drinking water or wastewater monitoring. The value of 650 mV represents a strongly oxidizing environment (e.g. chlorinated water). It is particularly suitable for measurement ranges with high oxidation potentials. What do the specifications on the bottle mean? 650 mV This is the target value of the redox potential of the solution at the reference temperature. ± 5 mV This indicates the tolerance or accuracy. The actual value lies between 645 mV and 655 mV. (25 °C) The specified value applies exactly at 25 °C because the redox potential is temperature dependent. 250 ml This is the filling volume of the bottle. The larger quantity is suitable for frequent calibrations or for use in laboratories or operations. The solution is used to precisely calibrate or check a redox measuring device in the high oxidation range, where 650 mV at 25 °C is the defined reference value with an accuracy of ± 5 mV. Neomeris – For stable and precise ORP measurements. Ensure the functionality of your redox sensors and achieve reliable measurement results with the professional buffer solutions from Neomeris. Rely on quality, safety and convenience when calibrating your measuring devices with the color-coded, ready-to-use solutions from Neomeris. Frequently asked questions Where can I find the safety data sheet for the solution I want to use? The safety data sheet is included in printed form with the delivery of the goods. The safety data sheet can be viewed or downloaded at any time in the download area of the online shop. What bottle sizes are available? Generally, there are 60/70 ml, 250 ml, 500 ml and 1,000 ml bottles. There is one exception, for example, with brands such as Hanna, where bags are sold instead of bottles. How long do the solutions last? The shelf life is printed on the product label. Upon delivery, the shelf life is at least 7 months. Can the solutions still be used after the expiry date? No, because the function and quality can no longer be guaranteed after the best-before date has expired. How can I dispose of the solutions? Please refer to the safety data sheet for more detailed information on the disposal of the solutions. Disposal must be carried out in accordance with official regulations. What is the emergency number for acute poisoning? The emergency number for the North Poison Information Centre is +49 551-19240 and is available 24/7.

Neomeris Redox Buffer Solution 650 mV is the ideal solution for calibrating redox electrodes (ORP sensors). Its easy dosing and safe handling make this solution perfect for a wide range of applications. Neomeris Redox Buffer Solution 650 mV ± 5 mV (25 °C), 500 ml - Precise calibration for demanding ORP measurements The Neomeris redox buffer solution with a stable value of 650 mV ± 5 mV at 25 °C is the ideal solution for calibrating redox electrodes (ORP sensors). It ensures reliable and reproducible measurement results in demanding applications in water and environmental analysis, wastewater technology, and industrial process control. Product advantages at a glance: Precise calibration: The solution provides a stable redox potential of 650 mV ± 5 mV at 25 °C – ideal for high-precision requirements. Certificate of analysis included: Each 500 ml bottle comes with a certificate documenting the quality and accuracy of the solution. Safe handling: The special hygienic cap reliably protects the solution from contamination. Easy dosing: By squeezing the bottle, the required amount of solution is transferred to the upper chamber – ideal for direct calibration without additional accessories. 500 ml content: Perfect for regular use in laboratories and industrial applications with higher consumption. Areas of application: Water and environmental analysis: Monitoring the redox potential in natural waters and drinking water treatment. Wastewater technology: Monitoring biological reaction processes in wastewater treatment plants. Industrial applications: Process control in chemical and pharmaceutical production. Neomeris – For stable and precise ORP measurements. Rely on quality, safety, and complete traceability – with professional calibration solutions from Neomeris, including a certificate of analysis. The practical 500 ml bottle with a hygienic dosing system makes the Neomeris calibration solution ideal for regular use in professional environments. Benefit from high precision, convenient handling, and consistently reliable measurement results – day after day. Frequently asked questions Where can I find the safety data sheet for the solution I want to use? The safety data sheet is included in printed form with the delivery of the goods. The safety data sheet can be viewed or downloaded at any time in the download area of the online shop. What bottle sizes are available? Generally, there are 60/70 ml, 250 ml, 500 ml and 1,000 ml bottles. There is one exception, for example, with brands such as Hanna, where bags are sold instead of bottles. How long do the solutions last? The shelf life is printed on the product label. Upon delivery, the shelf life is at least 7 months. Can the solutions still be used after the expiry date? No, because the function and quality can no longer be guaranteed after the best-before date has expired. How can I dispose of the solutions? Please refer to the safety data sheet for more detailed information on the disposal of the solutions. Disposal must be carried out in accordance with official regulations. What is the emergency number for acute poisoning? The emergency number for the North Poison Information Centre is +49 551-19240 and is available 24/7.