Filter products
Solution for the buffering of strongly alkaline water samples
Special indicator in powder form for the rapid colorimetric determination of minimum hardness traces in the range 0-0.1 °dH, 0-1.8 ppm CaCO3 or 0-0.2 °f (French hardness). Complete with measuring tube and spoon. Analyses: approx. 700 Measuring time: approx. ½ minute
LIMIT VALUE TEST KIT Liquid special indicator in dropper bottle for the monitoring of softened water, set for the limit values of 0.5 and 0.25 °dH (8,9 and 4,47 ppm). Description Complete with measuring tube and stopper Analyses: approx. 250 Measuring time: approx. ½ minute
Durognost SR 0 (0.1/0.05 °dH) Threshold test kit for the rapid determination of residual hardness. Threshold monitoring in the very low hardness range Special liquid indicator in a dropper bottle for monitoring the residual hardness of softened water, calibrated to the limit values of 0.1 and 0.05 °dH (1.79 and 0.89 ppm). Complete with measuring tubes and stoppers. Sufficient for approximately 250 analyses; the required measurement time is approx. 30 seconds. Identification of the hardness range When the indicator comes into contact with the water sample, it changes colour as soon as the specified limit values of 0.1 °dH or 0.05 °dH are reached or exceeded. How should the reagent be used? Please rinse the supplied measuring tube with the water sample. Then fill the measuring tube with the water sample up to the 5 ml or 10 ml mark. Add one drop of indicator and swirl the tube to dissolve it completely in the water sample. After a reaction time of approximately 30 seconds, the water sample will change colour. Water sample changes colour: Green = softened water is fine (within the defined range) Red = Regenerate the water softener Please read the supplied instructions for use before use.
LIMIT VALUE TEST KIT Liquid special indicator in dropper bottle for the monitoring of softened water, set for the limit values of 1 and 0.5 °dH (17,9 and 8,9 ppm). Description Complete with measuring tube and stopper Analyses: approx. 250 Measuring time: approx. ½ minute